Open view of Mega-Coupler # MLB
Base for MLB3/8. Fits 3/8" x1" Hex Head Bolt.
Steel Wingnut (SW)
Pictured above -
The standard Black Mega-Coupler # MLB. Has a 1/2″ × 1 1/4" Hex Head Bolt with the Light Source Wing Nut.
Our Mega-Coupler has solid nut tabs that won’t break off. Mega-Coupler uses standard half inch by 1-1/4 inch long hex head grade 8 bolts to secure your load. Bolt head locks into hex milled pocket so that you can tighten the nyloc nut while the clamp is installed. Has industry compatible 14 mm thick base. The Mega-Coupler fastens from (1-1/4" Pipe) 1.66" OD to 2 " OD truss tube.
Mega-Coupler Options -
- 1/2″ × 1 1/4" Hex Head Bolt with Nylock Nut (Standard Mega-Coupler pictured above)
- 1/2" countersunk (CS) flat head bolt (see Mega-Coupler with Flat Head Bolt.)
- 3/8" countersunk (CS) flat head bolt (see Mega-Coupler with Flat Head Bolt)
- 3/8″ × 1″ Hex Head Bolt (3/8)
- 1/2″ × 1 1/4" stainless steel (SS) bolt
- 1/2″ × 1 1/4" steel wingnut (SW)
- Minimum Size
1.25" pipe, 1.66" OD pipe
- Maximum Size
1.5" pipe, 1.90" OD pipe, 2" OD truss tube
- Safe Vertical Working Load
1,100 lb 500kg
- Hardware
Standard hardware -
1/2-13 × 1 1/4" Hex Head grade 8 zinc plated steel bolt with nylock nut
1" Belleville Washer- Weight
1.2 Pounds
- Case Quantities
24