The Mega-Coupler Pipe Adapter fastened to an optional Mega-Coupler # MLM. See how the tabs lock the rotation of the adapter in respect to the coupler. Also note the 1/2" hex bolt that secures the adapter in place. The 1-1/2" pipe threads are extremely strong. Note on the right hand side of the pipe threads, the inspection hole and the 1/4"-20 set screw hole.
Black Mega-Coupler Pipe Adapter attached to an optional Black Mega-Claw # MWB
The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2"-13 tpi by 1" long bolt and a jam nut (not included). There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.
The Mega-Coupler Pipe Adapter can also be used on a Mega-Claw.
- Safe Vertical Working Load
1100 Pounds
- Hardware
1/4″ × .375 Socket Set Screw
- Weight
0.8 oz.
- Case Quantities
each