With E-Clip ratchet strap (sold separately)
The near truss is stacked on the MTD12/2, the far truss is stacked is the MTD12/3.
Optional Mega-Coupler on outside ends of the Mega-Truss Dolly keeps the dollies from tipping when the ratchet straps are loose. The Mega Coupler seen is a version of the # MLM and is sold individually. Two are needed for each dolly.
Inside or outside placement of optional Mega-Couplers.
The Mega-Truss Dolly easily holds truss for transport or storage. 5 inch aluminum channel has CNC milled cutouts for truss to ride in. The truss is secured tightly with an E-Clip ratchet strap (optional) before transport on its two 480 pound rated four inch heavy duty casters. Any size and quantity of truss is available up to 48 inch in total length. A pair of Mega-Truss Dollies will carry up to 1920 total pounds of truss.
Add the optional Mega-Couplers(# MLM) to hold the outside bottom pieces of truss directly to the Mega-Truss Dolly without the straps, to help in rolling the Mega-Truss Dolly to load or unload truss without tipping the dollies. See Photo below. NOTE: when ordering it is important to signify where you need the Mega-Couplers placed (inside or outside). These Mega-Couplers do require special hardware depending upon where they are placed.
Optional E-Clip ratchet straps are not included and are sold separately, Part # MTDESTRAP
- Safe Vertical Working Load
960 Pounds per dolly
- Hardware
Encore 4″ × 2″ 480# rated casters each secured with 4 each 3/8″ × 3/4" grade 5 Hex head cap screws and serrated hex flange nuts.
- Weight
Approx. 28 pounds for each set, E-Strap 2.2 pounds
- Case Quantities
pair