Mega-Coupler Pipe Adapter
Mega-Coupler Pipe Adapter

Mega-Coupler Pipe Adapter
Aluminum Finish
Part Number:
MP1.5B.5M

Mega-Coupler Pipe Adapter

Mega-Coupler Pipe Adapter
Black Anodized
Part Number:
MP1.5B.5B

Mega-Coupler Pipe Adapter

Two Interlocking tabs keep the adapter from rotating.

Mega-Coupler Pipe Adapter

There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted

Mega-Coupler Pipe Adapter

The Black Mega-Coupler Pipe Adapter is shown attached to a black Mega-Claw. (The Mega-Claw is not included and must be purchased separately.)

Mega-Coupler Pipe Adapter

The silver Mega-Coupler Pipe Adapter is shown attached to a Quad Coupler 1.5. (The Quad Coupler 1.5 is not included and must be purchased separately.)

The Pipe to Coupler Adapter can be used to rig pipe-mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded NPT 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2"-13 tpi by 1" long bolt and a jam nut (not included). There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.

The Mega-Coupler Pipe Adapter can also be used on a Mega-Claw.

Download Spec Sheet (PDF)
Safe Vertical Working Load

1100 Pounds

Hardware

1/4″ × .375 Socket Set Screw

Weight

0.8 oz.

Case Quantities

each

Order Codes

MP1.5B.5B Mega-Coupler Pipe Adapter, Black Anodized
MP1.5B.5M Mega-Coupler Pipe Adapter for 1.5" Pipe, Silver
TTPA1.5B Truss to Pipe Adapter 1.5, Black Anodized
TTPA1.5M Truss to Pipe Adapter 1.5, Silver