The Light Source’s new Micro-Recessed fixture has been designed from the ground up as an easy to install retrofit fixture with a 6-3/4 inch rough in opening. The Micro-Recessed fixture’s open design can easily be installed from below the ceiling by hooking through the rough in opening and rotating the fixture up into the ceiling. The electrical box is removable to pull below the ceiling for dimmer settings or maintenance.
The fixture is also listed for wet locations, covered ceilings for use outdoors. The new patent pending 40 Watt LED array has the exact same white light output levels with either the white or the RGBW LED modules. The Micro-Recessed has amazingly deep saturated colors with the RGBW LED Module and a beautifully crafted white light.
The Micro-Recessed has a choice of either a 90 degree or 50 degree 2.5 inch diameter lens. The Light Source carefully optimized the lens system using cutting edge computer optical simulation to achieve over 90 percent optical efficiency. Compared with most fixtures, the Micro-Recessed outputs more of the light created by the LED’s with very little light lost in the fixture interior.
The Micro-Recessed has up to a 2600 Lumen output.
Optional Sloped Ceiling Adapter Trim Rings are made to order to match the project’s ceiling’s slope.
The Micro-Recessed has incredible dimming capabilities, smoothly fading all the way down to zero. RDM is enabled on the RGBW Micro-Recessed fixtures to allow address setting from any RDM enabled console.
The thermal management in the Micro-Recessed fixture’s massive heatsink maintains the LED module and other electronics at optimum temperatures for long life without the need for noisy and unreliable fans.
All of The Light Source’s LED Micro-Recessed fixtures are built to order in our Charlotte, NC factory to provide exactly the right fixture required for each application. The Micro-Recessed fixture’s LED Modules and Dimmer Modules are manufactured with The Light Source’s state of the art SMT line.
The entire Micro-Recessed fixture’s metalwork is also manufactured in our factory with the latest CNC equipment. The Light Source has invested in powder coating equipment to allow for standard colors in black and white, as well as producing Micro-Recessed fixture in any of the RAL powder colors without having to send fixtures out of house. This in house manufacturing control allows us the confidence to provide these ELT listed fixtures with a 10 year no hassle warranty.
ETL listed for Indoor and Damp locations.