Mega-Clamp Mega-Clamp
The world’s standard theatrical lighting c clamp, the Mega-Clamp, is created from high tensile, aircraft grade, extruded aluminum. The Mega-Clamp's 600 pound design load is twice as strong as most cast iron clamps. In 1993, the Mega-Clamp was ...
Mega-Clamp Parts Mega-Clamp Parts
Mega-Clamp Parts 1/2" x 3" Square Head Set Screw 1/2" x 1" Hex Head Grade 5 Cap Screw 1" Diameter Belleville Washer
Micro-Clamp Micro-Clamp
The Micro Clamp is ideal for hanging miniature fixtures like MR-16's onto a small pipe or tube. Made from high tensile aircraft aluminum. Solid design grips pipe with micro grooves, has spring loaded pan adjustment, and has 5/16" fasteners. Ava...
Mini-Clamp Mini-Clamp
The Mini-Clamp is perfect for PAR 38's, Pin Spots, and other small fixtures. The clamp is made from an aircraft grade aluminum extrusion with micro-grooves that conform to the pipe for real gripping power. The Mini-Clamp will grip from 3/4" ...
Monstro-Clamp Monstro-Clamp
The Monstro-Clamp 4" fastens to 2-3/8" OD to 4" OD pipes. CNC cut from solid one inch thick aluminum plate. 1/2"-13 x 4" square head bolt.
Safety-Clamp Safety-Clamp
Perfect for high catwalks and educational facilities with less experienced crews. Snaps onto the pipe with a carabineer style latch and cannot fall off. (except off the end of the pipe!) Easily fastens to 1-1/4" Pipe (1.66" OD), 1-1/2" Pipe (1....
Mini-Clamp Parts Mini-Clamp Parts
Mini-Clamp parts include plastic handles, grade 5 3/8" hex head cap screws, and 7/8" diameter Belleville washers.
8 Inch Mega-Beam Clamp, 3 ton 8 Inch Mega-Beam Clamp, 3 ton
The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 8" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6 tpi Acme threaded shaft. ...
16 Inch Mega-Beam Clamp 3 ton 16 Inch Mega-Beam Clamp 3 ton
The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 16" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded shaft....
Versi-Clamp Versi-Clamp
The Versi-Clamp wraps around the entire range of standard truss, from 2" OD down to 1" OD, all without marring the truss. The unique 2 position latch on the link saves time when switching from 2" truss to a small truss, just connect to the second ...
10 Inch  Mega-Beam Clamp, 3 ton 10 Inch Mega-Beam Clamp, 3 ton
The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 10" model has a 3 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded shaft....
24 Inch Mega-Beam Clamp 2 ton 24 Inch Mega-Beam Clamp 2 ton
The Mega-Beam Clamp is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 24" model has a 2 ton rating. The two aircraft aluminum jaws are adjusted on the 3/4"-6" tip Acme threaded shaft....
TC Clamp TC Clamp
The TC Clamp will fasten from 2" OD to 1.5" OD tube. The TC Clamp has a 2-1/2" T-handle so no tools are required to fasten to the pipe. 1.25" x 1/2"-13 TPI Grade 8 fastener, Nylock Nut and 1" diameter Belleville Spring washer are provided for c...
Mega-Batten Clamp Mega-Batten Clamp
The two-piece, Mega Batten Clamp is great way to hang 1-1/2" pipe. The tight compression fit keeps pipe from rotating within the clamp. The Mega Batten Clamp wraps around the pipe batten on both sides and fastens with two 5/16"-18 TPI Socket Cap...
8 8" Mega-Tent Beam Clamp
Mega Tent Beam Clamps The Mega Tent Beam Clamps opens 5-1/4" to fasten securely into the Keder track slot in free span tent beams. The 8" Mega-Tent Beam Clamp engages the Keder track slot on both sides for 8 inches. The 8" Mega-Tent Beam Clamp h...
Purlin Clamp Purlin Clamp
The Purlin Clamp is perfect for installing almost anything to bar joists, purlins and I-beams up to 1" thick. A 1/2"-13 x 2.5" fully threaded square head set screw is provided for locking onto the structural member. A 1/2"-13 x 1" grade 5 Hex Hea...
Barco Projector Clamp Barco Projector Clamp
The TC-Barco Projector Clamp will fasten from 2" OD to 1.5" OD Tube. Has a 2-1/2" T-Handle so no tools are required to fasten to the pipe. Over 2" of adjustment is possible with the half turnbuckle design. .390" hole for shackle mounting to pro...
4 4" Mega-Tent Beam Clamp
Mega Tent Beam Clamps The Mega Tent Beam Clamps opens 5-1/4" to fasten securely into the Keder track slot in free span tent beams. The 4" Mega-Tent Beam Clamp engages the Keder track slot on both sides for 4 inchs. 4" Mega-Tent Beam Clamp has a ...
TC Swivel Clamp TC Swivel Clamp
The TC CLamp will fasten two 2" OD to 1.5" OD tubes together. The TC Clamp has two 2-1/2" T-handles so no tools are required to fasten to the pipe.
Threaded Rod Hanger for Mega-Batten Clamp Threaded Rod Hanger for Mega-Batten Clamp
The Threaded Rod Hanger for the Mega-Batten Clamp is a 1 inch by 1.25 inch by 3 inch tall machined aircraft grade aluminum body with a .5 inch by .75 inch socket shoulder bolt to connect to the Mega-Batten Clamp. The design load is 1,250 pounds. ...
Tent Beam Clamp Tent Beam Clamp
Half-Inch Slot Tent Beam Clamp The half-inch slot Tent Beam Clamp fits smaller tent free-span tent beams with a one-half inch slot in the bottom the tent beams. The Tent Beam Clamp is designed to be used on diagonal tent roof support beams a...
Mega-Folding Batten Clamp Mega-Folding Batten Clamp
The one-piece, Mega-Folding Batten Clamp is the fastest way to hang 1-1/2" pipe. The tight compression fit keeps pipe from rotating within the clamp. The Mega-Folding Batten Clamp hinges around the pipe batten and fastens with a single 7/16"-14 T...
Chain Pole Clamp Chain Pole Clamp
Chain Pole Clamp The extremely low profile Chain Pole Clamp clamps securely to 2.375” to 7”OD tent poles utilizing many contact points to maximize its grip while the 6061T-6 aluminum link design minimizes potential damage to the tent poles. Beef...
Mega-Truss Tee Clamp Mega-Truss Tee Clamp
The Mega-Truss Tee Clamp is great for holding a pipe to the end of a truss for holding light fixtures. Sold in pairs and provided with 5/8" x 1-1/4" Hex head bolts to fasten through the standard truss bolt holes. 1/2-13 socket set screw for lock...
Mini-Clamp IV Mini-Clamp IV
The Mini-Clamp IV with 18-8 stainless steel fasteners will fit any IV pole from 5/16" to 2" OD. (8 mm-50 mm) The convenient plastic handle makes it easy to install to the IV pole. Thousands of ventilators have now been equipped with the Mini-Cl...
TC Clamp Hardware TC Clamp Hardware
TC Clamp hardware includes: 1/2" Hex Head Cap Screw Grade 5 Nylock Jam Nut 1" Diameter Belleville Washer Hardware Packs include 12 of each part.
Mega-Baby Mega-Baby
The Mega-Baby is designed to allow location style lighting fixtures, (lighting fixtures that normally mount to a 5/8" pin on a floor stand), to be hung from the studio grid. The fixture is mounted onto the Mega-Baby's chrome plated 5/8" x 2-1/2" ...
Mega-Cable Carrier Mega-Cable Carrier
The Mega-Cable Carrier gives you a channel to drop your cables into above the batten or grid. The Mega Cable Carrier has a 1/2" mounting hole and is bolted to a clamp. The assembly is then fastened above a pipe batten or grid to run cables. Th...
Mega-Claw Mega-Claw
The new standard truss clamp for hanging intelligent lighting fixtures. Allows one man to hang intelligent fixtures. Simply flip the link up, place the clamp over the pipe and the Mega-Claw holds the weight of the fixture while you secure it with...
Mega-Coupler Mega-Coupler
The Mega-Coupler has solid wing nut tabs that are stronger than regular steel wing nuts. The grade 8 Hex Head Cap Screw locks securely into the hex milled pocket so that the nylock nut can be tightened while the clamp is installed The Mega-Coup...
Micro-Mic Micro-Mic
Holds 5/8" Atlas mic stand tubes. Will fasten onto most objects up to 2" thick. Constructed of 6061-T6 Aluminum with a black anodized finish. The Micro Mic is 1-1/4" wide and has two 21/32" holes to hold Atlas stand tubes. The clamp is fastene...
Mega-Baby Sidearm Mega-Baby Sidearm
Each Mega-Baby Sidearm Complete includes the Clamp, Combo Wrench, tube and slider (as pictured above). Additional size tubes and sliders can be purchased separately. You can change the pipe length or add a slider with the pull of a pin. The...
Mega-Handle Square Mega-Handle Square
The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The square end of the bolt nests into t...
Mega-Swivel Mega-Swivel
Pan locking bolt style theatrical C-Clamp. Fixture is bolted to and rotates on a steel post in the clamp body. It comes with half inch fasteners.
Mini-Claw Mini-Claw
The Mini-Claw has a lightweight profile and is used for hanging small lighting fixtures on truss or pipes. The Mini-Claw's wrap around construction protects truss from being marred and supports the weight of the fixture as it is being secure...
Mega-Swivel Coupler Mega-Swivel Coupler
The Swivel Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Swivel-Coupler has wide wing nuts for fastening the clamp to the pipe or tube. The Swivel Coupler can be locked into a 90 degree fixed coupler by adding ...
Mega-Drop Down Mega-Drop Down
The Mega-Drop Down is a quick and inexpensive way to place a light fixture below the pipe or grid. It now has new wrench flats for easy adjustments. The Mega-Drop Down is made from solid 3/4" diameter 6061 T-6 aircraft grade aluminum and is ma...
Mega-Baby Pin Mega-Baby Pin
The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13 threads and is available in a Male and Female threa...
Coupler with Eye Nut Coupler with Eye Nut
The Mega-Coupler with Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2" flathead socket screw with permanent loctite. The Eye Nut rigging connecti...
7 Inch Mega-Airwall Hanger 7 Inch Mega-Airwall Hanger
The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the hanger giving a total of 14 inches of metal to metal c...
4 Inch Mega-Airwall Hanger 4 Inch Mega-Airwall Hanger
The Mega-Airwall Hanger 4" is 500 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the hanger providing a total of 8 inches of metal to metal...
Jaw Set for 2 Inch Thick Beam Flanges Jaw Set for 2 Inch Thick Beam Flanges
Set of jaws for fastening the Mega-Beam Clamp on up to 2" thick beam flanges. CNC milled from 6061T-6 aluminum billet. Can be field exchanged with the standard jaws with just hand tools.
TC Plasma Mount TC Plasma Mount
The TC Plasma Screen Mount supports a plasma or LCD screen from a box truss or pipe. A pair of clamps are provided, one for each side of the screen. The plasma screen is easily bolted to the TC Plasma Screen Mounts with 6mm, 8mm, or 10mm bolts, (...
90 Degree Fixed Coupler 90 Degree Fixed Coupler
The Mega-Coupler will fasten from 1-1/4" pipe (1.660" OD) to 2.050" OD truss tube. The Mega-Coupler has the wide wing nuts for fastening the clamp to the pipe or tube. Safe Vertical Working Load 1100 Pounds, (500 KG).
Quad Coupler 1.5 Quad Coupler 1.5
The Quad Coupler 1.5 will clamp from 1.25” OD to 1.5” OD tubing, as well as 1" pipe (1.315" OD.) The Quad Coupler 1.5 is 1.25" thick. The Quad Coupler 1.5 will also bolt to 1-1/4" square tube locking the clamp parallel with the 1-1/4" square tub...
WL Series WL Series
APPLICATIONS The Light Source WL Series 6” Fresnel LED pendant is perfect for applications requiring up to 12,750 lumens with excellent dimming, tight beam control, and a high quality of light. The luminaire provides the look and feel of a natura...
Maffer Pin Adapter Maffer Pin Adapter
1/2"-13 TPI threads on a hex Maffer stud for fastening light fixture to maffer clamp 1" Belleville washer and Nylock nut included.
Custom Stamp, Custom Laser Marking Custom Stamp, Custom Laser Marking
Have your name/logo custom stamped or laser etched on these select products: Mega-Combo Wrenches Mega-Clamps Mega-Claws Slim Claws TC clamps. Because of product shape differences, each different product may require a separate st...
Quad-Coupler 2.5, Swivel Quad-Coupler 2.5, Swivel
The Quad-Coupler Swivel will connect tubes from 2-1/2 OD to 1.9 OD. The Quad-Coupler has our wide wing nut for fastening the clamp to the pipe or tube.
Quad-Coupler 2.5, 90 Degree Quad-Coupler 2.5, 90 Degree
The Quad-Coupler 90 degree will connect tubes from 2-1/2 OD to 1.9 OD. The Quad-Coupler has our wide wing nut for fastening the clamp to the pipe or tube.
HL Series Pendant, White Light HL Series Pendant, White Light
APPLICATIONS The Light Source HL Series 6” Fresnel LED pendant is perfect for applications requiring up to 12,750 lumens with excellent dimming, tight beam control, and a high quality of light. The luminaire provides the look and feel of a natura...
Atlas Mic Stand Adapter Atlas Mic Stand Adapter
The Atlas Mic Stand Adapter will hold a microphone mount and threads into most clamps. The Atlas Mic Stand Adapter is CNC machined out of steel with a hex head for tightening. Standard 5/8"-27 Atlas threads at one end with a 1/2"-13 x 3/4" stud...
Micro Airwall Hanger Micro Airwall Hanger
Micro Airwall Hanger The Micro Airwall Hanger fits Modernfold # 14 and any movable wall track with a .5 inch slot to a .625 inch slot in the bottom. Simply insert the Micro Airwall Hanger into the movable wall’s slot, twist the Micro Airwall Han...
Angled Jaw Set Angled Jaw Set
The Angled Jaw set is CNC machined from 6061T-6 aluminum billet to match the slope and beam flange width of the I-beams on your project. These jaws will de-rate the Mega-Beam Clamp by one ton. Order them with a Mega-Beam Clamp and we will install...
CPC Light Mount Bracket CPC Light Mount Bracket
CPC Light Mount Bracket The Light Chain Mount Bracket is CNC machined and formed from 6061T-6 aluminum and attaches with two stainless steel 3/8” x 1.5” ball detent pins through the Light Chain Mount and the hollow chain link pins to secure secur...
CPC Coupler Chain Mount CPC Coupler Chain Mount
Coupler Chain Mount The Coupler Chain Mount is CNC machined from 6061T-6 aluminum and attaches with two stainless steel 3/8” x 1.5” ball detent pins through the Coupler Chain Mount and the hollow chain link pins to secure an attached Mega-Coupler...
CPC Chain Extension CPC Chain Extension
Chain Pole Clamp Extension The Chain Pole Clamp Extension extends the grip range of the Chain Pole Clamp by 7” diameter out to 14” diameter. The Chain Pole Clamp Extension installs easily with just one quick release ball detent pin. The stainle...
CPC Chandelier Mount CPC Chandelier Mount
CPC Chandelier Mount The Chandelier Mount is CNC machined from 6061T-6 aluminum and fastens to the main body of the Chain Pole Clamp with two ½”-13 flathead socket screws. The substantial body of the Chandelier Mount has a square cross section h...
CPC Coupler Mount CPC Coupler Mount
CPC Coupler Mount The Coupler Pipe Mount is CNC machined from 6061T-6 aluminum and fastens to the main body of the Chain Pole Clamp with two ½”-13 flathead socket screws. A Mega-Coupler 1/2CS is then fastened to the Coupler Pipe Mount with an ad...
CPC Chain Hoist Adapter CPC Chain Hoist Adapter
CPC Chain Hoist Adapter The CPC Chain Hoist Adapter is the lowest profile and cleanest looking method of connecting a chain motor to a tent pole. The center of the pick point is 8 inches from the pole surface to allow the chain motor full cleara...
SM Series LED Surface Mount or Pendant LED Fixture SM Series LED Surface Mount or Pendant LED Fixture
APPLICATIONS The Light Source SM Series 6” Fresnel LED Surface Mount Fixture is perfect for applications requiring up to 12,750 lumens with excellent dimming, tight beam control, and a high quality of light. The luminaire provides the look and f...
Mega-Quick Disconnect Mega-Quick Disconnect
The Mega-Quick Disconnect permits up to a 250 pound fixture to be pulled for transport or service and replaced in exactly the same location and orientation. The slide fastens to the lighting fixture. The Mega-Quick Disconnect body fastens to a ...
Thread Adapter, Inch to Metric Thread Adapter, Inch to Metric
The Inch to Metric Thread Adapter makes it easy to connect a clamp without having to use adapter plates. It is made from CNC machined 90,000 pound tensile strength zinc plated steel. One end of the Inch to Metric Thread Adapter will thread into ...
Barco Standoff  with M10 Threads Barco Standoff with M10 Threads
The Barco Standoff threads into the M10 sockets on top of Barco projectors. A 3/8" x 3/4 button head cap screw with locktite applied secures the adapter to the supporting TC Clamp. To level or tilt the projector, rotate the large hex shaped port...
Mega-Handle Hex Mega-Handle Hex
The Mega-Handle Hex will lock the yoke bolt on most fixtures. Insert the the threaded end of the yoke bolt into the hex pocket of the Mega-Handle Hex and thread the bolt into the clamp. This holds the Mega-Handle Hex captive, always ready to loc...
Mega-Coupler Grounder Mega-Coupler Grounder
The Mega-Coupler® Grounder™ solves problems you didn’t even know you had! Just think of all the electrical items that are fastened to a pipe or truss rig. Many trusses are suspended with polymetric materials, that do not conduct electricity, suc...
Uni-Bolt for Strut Channels Uni-Bolt for Strut Channels
The Uni-Bolt fastens fixtures or pipes to strut channel. Insert the Uni-Bolt into the strut channel, rotate 90 degrees and spin the 2" diameter knurled disk to lock into the channel. Also available for 1 5/8" x 13/16" strut channel. The UB2B ...